Factory Supply Cyanuric chloride Powder CAS 108-77-0 Raw Materials

Related Attributes

Product details

Uses and synthesis of Cyanuric chloride Powder

Cyanuric chloride Raw Materials, also known as cyanuric chloride, is a white crystal with a strong irritating chlorine odor, corrosive to skin, irritating to eyes and lachrymatory. Melting point 145℃, boiling point 190℃, UVλmax241nm(ethanol). Soluble in anhydrous ethanol, ether, chloroform, acetic acid and acrylonitrile, insoluble in cold water.Cyanuric chloride Powder is slow when cooled with water and quickly hydrolyzed to cyanuric acid (C3H3O3N3) and hydrochloric acid when heated, and the products are all relatively soluble in water, so it can be separated using the extraction method.Cyanuric chloride CAS 108-77-0 Partially converted to cyanuric acid with concentrated nitric acid and concentrated sulfuric acid at room temperature, and triester of orthocyanuric acid with sodium alcohol, also can act with ammonia, amine, phenol and so on.

Cyanuric chloride CAS 108-77-0 is an organic compound with the molecular formula of C3Cl3N3, it is an important fine chemical product with a wide range of uses, Cyanuric chloride CAS 108-77-0 is an intermediate in the pesticide industry, it is a raw material for the manufacture of reactive dyestuffs, and it can be used as a variety of auxiliaries in the production of organic industry, such as It can be used as various auxiliaries in organic industry, such as fluorescent whitening agent, textile anti-shrinking agent, surfactant, etc. It is one of the raw materials for rubber accelerator and national defense used in manufacturing explosives, and Cyanuric chloride Powder is also the raw material used for synthesizing drugs in pharmaceutical and pesticide industry.

Applications / Functions of Cyanuric chloride Powder

1. Cyanuric chloride Powder is used in the synthesis of fluorescent whiteners, reactive dyes, pharmaceuticals and pesticides.
2. Cyanuric chloride Raw Materials is an important intermediate for the production of highly efficient and low-toxic benzotriazole herbicides and pesticides, as well as an intermediate for the production of fluorescent whiteners, polyester and other synthetic fibers for dyeing reactive dyes. It is also used in the production of synthetic resin, rubber, polymer antioxidant, explosives, fabric shrinkage inhibitor and surfactant.
3. Cyanuric chloride CAS 108-77-0 is an important fine chemical product with a wide range of uses, it is an intermediate in the pesticide industry, a raw material for the manufacture of reactive dyestuffs, and can be used as a variety of additives to the production of organic industry, such as fluorescent whiteners, textile shrinkage prevention agents, surfactants, etc., and is one of the raw materials used in the manufacture of explosives for rubber accelerators and national defense, and is also It is one of the raw materials for rubber accelerator and national defense for making explosives, and is also the raw material for synthesizing drugs in medicine and pesticide industry.

Physicochemical Property of Cyanuric chloride Powder

Cyanuric chloride Powder is a crystal with pungent odor. Soluble in chloroform, carbon tetrachloride, ethanol, hot ether, acetone, dioxane, slightly soluble in water.

production methodprocess of Cyanuric chloride Powder

Cyanuric chloride Raw Materials is obtained by reacting anhydrous hydrocyanic acid with dry chlorine gas in daylight (or in anhydrous ether), or by heating cyanuric acid with excess phosphorus pentachloride.

The production of Cyanuric chloride Powder usually consists of two processes: cyanogen chloride preparation and cyanogen chloride polymerization. There are various methods to produce cyanogen chloride, such as the synthesis method of methyl thiocyanate and chlorine, the synthesis method of hydrocyanic acid dissolved in chloroform and chlorine gas, hydrocyanic acid method, sodium cyanide method, urea method, direct chlorine cyanide method with hydrocyanic acid and chlorine gas, etc. At present, industrial production of cyanuric chloride is generally used in the raw materials of sodium cyanide and hydrocyanic acid as the raw material of the two methods.

• 1. Sodium cyanide method uses sodium cyanide as raw material to react with chlorine gas to generate cyanuric chloride, and then polymerize to generate cyanuric trichloride through rapid cooling and crystallization to produce products. Raw material consumption quota: sodium cyanide 1073kg/t, chlorine gas 1700kg/t.
• 2. Hydrocyanic acid method uses hydrocyanic acid as raw material to react with chlorine gas to generate cyanuric chloride, then polymerize to generate cyanuric trichloride, and then produce the products through rapid cooling and crystallization. Raw material consumption quota: hydrocyanic acid 500kg/t, chlorine gas 1200kg/t.

Why choose us?

HRK Factory

About Shipping