Factory Supply Toluene diisocyanate liquid CAS 26471-62-5 Raw Materials

MF:C9H6N2O2

MW:174.15614

EINECS:247-722-4

Specification:Toluene diisocyanate liquid

Sample:Toluene diisocyanate liquid

Brand: Toluene diisocyanate liquid

Appearance: white liquid

Storage: Cool Dry Place

Brand: Globalchemical

Shelf Life: 2 Years

Test Method: HPLC

Uses and synthesis of Toluene diisocyanate liquid

Toluene diisocyanate liquid is colorless transparent to light yellow liquid, with irritating odor; darkened by light.

Toluene diisocyanate CAS 26471-62-5 Colorless transparent or light yellow flammable liquid. Toluene diisocyanate liquid miscible with ethanol (decomposition), diethylene glycol, ether, acetone, carbon tetrachloride, benzene, chlorobenzene, kerosene, olive oil.

Toluene diisocyanate Raw Materials is insoluble in water; soluble in acetone, ethyl acetate and toluene. Reacts readily with compounds containing active hydrogen atoms: amines, water, alcohols, acids, bases, especially with sodium hydroxide and tertiary amines in an uncontrollable way, and gives off a lot of heat.Toluene diisocyanate CAS 26471-62-5 reacts with water to form carbon dioxide, which is one of the key reactions in the manufacture of polyurethane foam.

Applications / Functions of Toluene diisocyanate liquid

1. Toluene diisocyanate Raw Materials are used as raw materials in the manufacture of flexible polyurethane foams, coatings, rubbers and adhesives.
2. Toluene diisocyanate liquid is used in the manufacture of polyurethane foams and rubbers, insulating paints and adhesives.

Physicochemical Property of Toluene diisocyanate liquid

Colorless transparent or light yellow flammable liquid. Strong irritating odor. Toluene diisocyanate liquid is miscible with ethanol (decomposition), diethylene glycol, ether, acetone, carbon tetrachloride, benzene, chlorobenzene, kerosene, olive oil.

Toluene diisocyanate CAS 26471-62-5 is colorless transparent to light yellow liquid, with irritating odor; darkened by light. Relative density 1.22±0.01(25℃). Freezing point 3.5~5.5 ℃(TDI-65); 11.5~13.5 ℃(TDI-80); 19.5~21.5 ℃. Boiling point 251 ℃. Flash point 132 ℃ (closed cup). Vapor density 6.0. Vapor pressure 0.13kPa(0.01mmHg20℃). Vapor and air mixture flammability limit 0.9~9.5%.

Toluene diisocyanate Raw Materials is insoluble in water; soluble in acetone, ethyl acetate and toluene. Reacts easily with compounds containing active hydrogen atoms: amines, water, alcohols, acids, bases, especially with sodium hydroxide and tertiary amines in an uncontrollable way, and gives off a lot of heat. Reaction with water to form carbon dioxide is one of the key reactions in the manufacture of polyurethane foam; should be avoided from moisture.Toluene diisocyanate Raw Materials polymerization reaction speed is very slow at room temperature, but heated to more than 45 ℃ or in the presence of catalysts can be self-polymerization to produce dimers. It can react with strong oxidizer. It will catch fire when exposed to heat, open flame or sparks. Decompose by heating to release cyanide and nitrogen oxides.

production methodprocess of Toluene diisocyanate liquid

Toluene diisocyanate liquid is produced by the action of 2,4-diaminotoluene and phosgene, firstly, dissolve solid diaminotoluene in chlorinated benzene, and warm up to 70℃ to get diaminotoluene chlorobenzene solution under stirring, then recycle the oxidized benzene which is photogasified, put it into low temperature phosgene cooker, make up a certain amount of liquid phosgene, and then dropwise add prepared diaminotoluene solution under stirring and carry on photogasification in 40℃, then put it into low temperature phosgene cooker. ℃ for photogasification, and then the low-temperature photogasification of the material into the high-temperature pot for high-temperature photogasification, while heating and venting, about 4h, the reaction is generally carried out at 120 ~ 125 ℃; the reaction is completed, after nitrogen to drive the gas, distillation, distillation and obtained.