2-Mercaptobenzimidazole powder Raw Materials CAS 583-39-1

MF:C7H6N2S

MW:150.2

EINECS:209-502-6

Specification:2-Mercaptobenzimidazole powder

Sample:2-Mercaptobenzimidazole powder

Brand:2-Mercaptobenzimidazole powder

Appearance: white powder

Storage: Cool Dry Place

Brand: Globalchemical

Shelf Life: 2 Years

Test Method: HPLC

Uses and synthesis of 2-Mercaptobenzimidazole powder

2-Mercaptobenzimidazole powder is a kind of mercapto-substituted azepine compounds, it is a kind of important drug intermediates, 2-Mercaptobenzimidazole CAS 583-39-1 is widely used in medicine, pesticide, chemical industry, etc. 2-Mercaptobenzimidazole Raw Materials is white or light yellow fine crystalline powder, toxic, bitter taste. 

2-Mercaptobenzimidazole Raw Materials is white or light yellow fine powdery crystals, non-toxic, with bitter taste.

Applications / Functions of 2-Mercaptobenzimidazole powder

• 2-Mercaptobenzimidazole powder is mainly used in synthetic rubbers, male rubber, styrene butadiene rubber, nitrile rubber and latex, etc. It is soluble in alkaline solution.
• Dissolved in alkaline solution, M is used as copper plating brightener, can make the plating layer bright, and has a levelling effect. It can also increase the working current density. Often used in combination with N, SPS, etc.
• 2-Mercaptobenzimidazole CAS 583-39-1 In the rubber industry is the main non-polluting antioxidant, can reduce the discolouration of rubber vulcanisation.2-Mercaptobenzimidazole Raw Materials Suitable for the manufacture of transparent, white and bright-coloured products, heat-resistant and foam products, the product is not discolouring, and is not contaminated. It does not change colour and is not contaminated.

Physicochemical Property of 2-Mercaptobenzimidazole powder

2-Mercaptobenzimidazole powder is white powder. Odourless but with bitter taste. Soluble in acetone, ethanol, not easily soluble in benzene, petrol and water.

Production methodprocess of 2-Mercaptobenzimidazole powder

1. Add 64kg of o-phenylenediamine, 18kg of potassium hydroxide, 52kg of carbon disulphide into the reactor. Start stirring, then add 480kg of alcohol, 190kg of distilled water slowly heated to dissolve, continue to heat and reflux for 3h. Cool down, stop boiling and add 24kg of activated carbon reflux for 20min, decolourisation. Then filter to remove the activated carbon.
2. The filtrate was put into the crystallisation tank, heated to 60-70°C and heated water 300 parts. Add aqueous acetic acid (30% to 32%) under stirring to make the crystallisation complete. Centrifugation and filtration, the crystals were collected and dried at 40°C to obtain 2-Mercaptobenzimidazole CAS 583-39-1.